Skip to main content
All CollectionsKnowledge share from RuptelaSoftware solutions
Configuration of Fuel level input from BLE sensor in object settings
Configuration of Fuel level input from BLE sensor in object settings
Updated over 6 months ago

How to configure Fuel level input from BLE:

Setting up main parameter of fuel level is shown below. If more than one BLE is installed, than they must be set on few of Custom inputs separately, and than summed up in "Fuel level".

  1. In Trust Track admin panel go to [objects] window;

  2. Find desired object by using available filters, this include Object ID, company name, object name, IMEI number etc.;

  3. Click [view/edit] for object you want to calibrate the fuel level:

    mceclip1.png
  4. After opening object editing window, scroll down until you see Custom inputs field and Fuel level field;

  5. Tick the „Fuel level“ parameter and select the appropriate input parameters:
    "Beacon X frequency" being the usuals.

    Make sure the "Linear" function is selected.

    Write „Min“ and „Max“ values of fuel tank in lists. MIN value should be set to 0, MAX value should be set to fuel tank capacity (L). Press the „Set“ button and enter the calibration data (two rows minimum).

Did this answer your question?