Skip to main content
All CollectionsKnowladge share from RuptelaSoftware solutions
Troubleshooting of Fuel tank report module
Troubleshooting of Fuel tank report module
Updated over a week ago

Description:

If there are many fake refills/drains in TT2 Fuel module or Fuel tank report, for example:

blobid0.jpg

You can try to apply standard fuel tank report template used by Ruptela depending on fuel tank capacity and fuel level source (CAN/FLS).

Steps:

1.Check what is MAX fuel tank capacity and Fuel level source:

Pic_1.png

2. Scroll down to “Fuel tank report parameters” at the bottom of the page:

Pic_2.png

3. Try to set "Fuel tank report parameters" according templates which are used by Ruptela depending on fuel tank capacity and fuel level source.

  • Use FLS templates if fuel level is measured from FLS:
    HCV FLS from 100 L to 500 L:

    FLS_100_500.png


    HCV FLS from 500 L to 1000 L:

    FLS_500_1000.png


    HCV FLS 1000+ L:

    FLS_1000%2B.png
  • Use CAN HCV/LCV templates if fuel level is measured from CAN:
    LCV CAN from 0 L to 100 L:

    CAN_0_100.png


    HCV CAN from 100 L to 500 L:

    CAN_100_500.png


    HCV CAN from 500 L to 1000 L:

    CAN_500_1000.png


    HCV CAN 1000+ L:

    CAN_1000%2B.png

4. Bellow Fuel tank report parameters:
1. Enter the date from which you want to recalculate the data (no more than 3 months)

2. Click on "Save". The Page will reload and will save set "Fuel tank report parameters" settings. The TT2 platform will start recalculating the Fuel module history.

Pic_3.png
Did this answer your question?