Description:
How to configure the device on requirement:
Ignition ON - buzzer ON until driver registers
AND
Ignition OFF - buzzer ON until driver registers
Required information:
Information needed in order to perform the task (plus who needs to provide it)
Ignition connection, ignition source | Customer |
Buzzer connection, which Dout is in use | Customer |
Recommended tools:
link all the apps needed in order to perform the task
Application | Download link |
Device Center or Advanced Configurator |
Steps:
In our case for ignition is used DIN4, and driver registration was done with Ibutton, Buzzer was connected on DOUT2.
1. Enable in IO list iButton driver ID and DOUT2 buzzer as shown:
2. For condition ignition OFF we will use DOUT "Activation conditions" step 7 in the previous picture. enter parameters as shown:
3. For condition ignition ON we enter settings in the driver registration window:
If something is working not as described recommendation in the configuration file enable IO DOUT status. And check how DOUT status changes when the ignition is triggered.
More information on buzzer configuration: https://doc.ruptela.com/articles/#!accessories-publication/buzzer-configuration/q/activation%2520conditions/qid/72503/qp/6
More information on Activation conditions: https://doc.ruptela.com/articles/#!hardware-solutions-publication/configuration-in-advanced-configurator/q/activation%2520conditions/qid/72503/qp/1