Omnicomm analog sensors support with Ruptela devices

Question: 

Are Omnicomm sensors supported by connecting to an analog input of Ruptela devices?
Sensor documentation: https://doc.omnicomm.ru/en/omnicomm_lls-af_4-manual

Answer: 

Analog input of our devices could be used for that.  
Example of AIN1 configuration: 

If connected to AIN, the sensor must be used in “Analog” mode. Most probably green wire of Omnicomm has to be connected to the selected Analog input (need to check wiring and pins scheme in sensor documentation).