Skip to main content
All CollectionsKnowladge share from RuptelaAccessoriesFuel Monitoring
Mechatronics fuel level sensors support with Ruptela devices
Mechatronics fuel level sensors support with Ruptela devices
Updated over a week ago

Question:

If the below-listed sensors are compatible with the Ruptela device's

  1. Mechatronics Eurosens Dizzi (ultrasonic fuel level sensor);

  2. Mechatronics Eurosens Dominator BT.

Answer:

  1. Mechatronics Dominator with physical interfaces (RS232, RS485, Analog) are compatible with our devices that have corresponding interfaces. For RS232 and RS485 our devices use a 19200 baud rate and LLS protocol.

  2. Mechatronics Dizzy - we never tried it, but since it uses LLS protocol, it should work with our devices as well.

  3. Mechatronics Dominator BT is compatible with all devices that have BT: HCV5, LCV5, Pro5, HCV5-Lite, Pro5-Lite, Trace5-LTE-IP67-EMEA, and Trace5-LTE-IP67-LA.
    In order to configure it, simply select this type of Bluetooth LE accessory and enter its MAC. Note: do not forget to Enable IO parameters!

Related documentation:

Did this answer your question?