Pol Mas Rovira
- Total activity 107
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 88
Activity overview
Latest activity by Pol Mas Rovira-
Pol Mas Rovira created an article,
How to correct mileage
Description: In some occasions, it might be necessary to modify the mileage. There are four ways to do that: Method name Only TT2 objects? Only Service Providers? Location Advanced Configurato...
-
Pol Mas Rovira created an article,
How to improve GNSS acquisition and accuracy
Description: The minimum number of satellites for a reliable position is 5 and HDOP (deviation) should be 1.5 or lower. To improve your GNSS acquisition, retention and accuracy, please try the foll...
-
Pol Mas Rovira created an article,
Device Center troubleshooting
Description: Device Center might not always run as expected, or might not seem to detect the connected devices for configuration. Below is a list of the common steps you must take in order to tackl...
-
Pol Mas Rovira created an article,
How to modify device configuration by SMS (setcfg command)
Description: This article describes how to modify configuration settings in the device remotely using SMS commands. Please note that some aspects of the configuration cannot be changed by SMS: N...
-
Pol Mas Rovira created an article,
How to get reports on Service Provider admin panel (sp-admin.ruptela.com)
Actions: Login to https://sp-admin.ruptela.com/login (if you don't have a user yet, please see HERE) Go to reports module: https://sp-admin.ruptela.com/report-generation Select Report type:”SMS s...
-
Pol Mas Rovira created an article,
How to get access to Service Provider admin panel (sp-admin.ruptela.com)
In case you don't have access to https://sp-admin.ruptela.com/login and you wish to have, please, inform support@ruptela.com to create a user for you. Inform about your: Service Provider's name ...
-
Pol Mas Rovira created an article,
Mileage sources for TT2
Description: There are multiple sources of mileage for TT2, some are based on GNSS positions while others are instead based on the vehicle's internal odometer (and obtained through CANBUS): GNS...
-
Pol Mas Rovira created an article,
Tachograph screen stays illuminated when ignition is off after connecting device
Description: Sometimes, when connecting a Ruptela device to the Tachograph, an unexpected side effect might occur when the tachograph screen will remains permanently illuminated even after ignition...
-
Pol Mas Rovira created an article,
Working time
Description: In some instances, it may be useful to know working hours or working time (in this context, meaning for how long ignition was on). In this case, we assume that the ignition relay is co...
-
Pol Mas Rovira created an article,
Input trigger
Description: "Input trigger" is specifies which parameter triggered the creation of a record. This is important because it is important to know which parameter triggered the creation of records whe...